China S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox helical bevel gearbox vs worm gear

Item Description

S series correct-angle helical-worm reduction gearbox was designed after RV worm microreducer, which have a comprehensive norm, wide speed for choice, and a variety of mounting positions.
Goods Description
S collection is 1 type of Helical worm gearbox, created as Modularization and high-stainless solid iron scenario. It is blend of helical gear and worm equipment, which with greater effectiveness and strength than straightforward aluminum alloy worm gearbox. Owing to their fantastic efficiency, these drives can be employed in each and every industrial sector and customized to personal torque and speed requirements. The equipment ratios afforded by the helical-worm equipment stage and the minimal sounds levels throughout operation make these gearmotors perfect low-expense answers for basic applications.
Excellent for the equipment and gear of adhering to market:
• Conveyor & Material dealing with
• Mining & Quarry
• Crusher & Cement
• Computerized production line & Mixer
• Transport & Packaging
• Foodstuff equipment & Beverage
• Construction & Metal processing
• Plastic & Chemical sector

Housing substance Large-energy cast iron  HT250
Equipment material 20CrMnTi
Input Electrical power .12-90KW
Output Torque three.5-4000N.m
Output Velocity five-371 RPM
Gear Precision seven to 6 degree
Equipment Surface area hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Noise(Max) 60-70dB
Tem.rise(Max) 40°C
Tem.rise(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency Solitary stage 98%, Double-phase:ninety six%, A few-stage:ninety four%
Mounting Placement Foot / Flange Mounting
Motor IP55,F Course

    

Enter electricity score and permissible torque
Dimension 37 47 fifty seven sixty seven 77 87 ninety seven
Composition S           SA             SF             SAF             SAT              SAZ
Rated Energy .twelve-1.5 .twelve-1.5 .18-3 .twenty five-5.5 .55-7.5 .75-15 one.5-22
Ratio six.8-157.43 7.28-201 seven.28-201 seven.sixty five-217.forty one 8.06-256.47 seven.88-288 8.26-286.four
Torque(N.m) ninety 170 300 520 1270 2280 4000

 

Gear Device Weight
Gear Device Kind S37 S47 S57 S67 S77 S87 S97
Bodyweight
 
7 10 14 26 50 a hundred 170
The bodyweight are suggest values, only for reference

 
Business Profile
HangZhou CZPT has been in electrical power transmission products for fifteen years. Our firm is an sector transmission solutions manufacuturer and service company.
The primary goods are worm reducers, helical worm reducers, helical bevel equipment reducers, 90 diploma gearbox, spiral bevel reducers, screw jack, normal industrial gearbox and many others.
Our velocity reducer and industrial gearbox are extensively utilized in different factories, these kinds of as substances, power, content managing, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.
We have robust technological capability, producing in accordance to the ISO9002 top quality management program recommendations.
Our industrial Gear, Gearbox, gearmotor and motor are marketed to more than thirty international locations. Higher top quality, very good price tag, in time response and honest service are our price and guarantees. We goal at creating satisfied cooperation with our customers, carry them reputable and comfy support.

Application
FAQ 
one. How to select a gearbox which fulfills our need?
You can refer to our catalogue to select the gearbox or we can help to choose when you supply
the complex information of necessary output torque, output speed and motor parameter and so forth.
2. What information shall we give ahead of positioning a purchase get?
a) Kind of the gearbox, ratio, input and output variety, input flange, mounting situation, and motor informationetc.
b) Housing coloration.
c) Purchase quantity.
d) Other specific demands.

three. What industries are your gearboxes becoming utilised?
Our gearboxes are broadly utilised in the regions of textile, foodstuff processing, beverage, chemical sector,
escalator,automated storage equipment, metallurgy, tabacco, environmental defense, logistics and etc.


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Marine, Toy, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: as Request
Step: Three-Step

###

Customization:
Available

|


###

Housing material High-strength cast iron  HT250
Gear material 20CrMnTi
Input Power 0.12-90KW
Output Torque 3.5-4000N.m
Output Speed 5-371 RPM
Gear Accuracy 7 to 6 level
Gear Surface hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Noise(Max) 60-70dB
Tem.rise(Max) 40°C
Tem.rise(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency Single stage 98%, Double-stage:96%, Three-stage:94%
Mounting Position Foot / Flange Mounting
Motor IP55,F Class

###

Input power rating and permissible torque
Size 37 47 57 67 77 87 97
Structure S           SA             SF             SAF             SAT              SAZ
Rated Power 0.12-1.5 0.12-1.5 0.18-3 0.25-5.5 0.55-7.5 0.75-15 1.5-22
Ratio 6.8-157.43 7.28-201 7.28-201 7.65-217.41 8.06-256.47 7.88-288 8.26-286.4
Torque(N.m) 90 170 300 520 1270 2280 4000

###

Gear Unit Weight
Gear Unit Type S37 S47 S57 S67 S77 S87 S97
Weight
 
7 10 14 26 50 100 170
The weight are mean values, only for reference

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Marine, Toy, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: as Request
Step: Three-Step

###

Customization:
Available

|


###

Housing material High-strength cast iron  HT250
Gear material 20CrMnTi
Input Power 0.12-90KW
Output Torque 3.5-4000N.m
Output Speed 5-371 RPM
Gear Accuracy 7 to 6 level
Gear Surface hardness HRC58°-62°
Input/Output shaft hardness HB220-250
Noise(Max) 60-70dB
Tem.rise(Max) 40°C
Tem.rise(Oil Max) 50°C
Vibration ≤20um
Backlash ≤20Arcmin
Effeciency Single stage 98%, Double-stage:96%, Three-stage:94%
Mounting Position Foot / Flange Mounting
Motor IP55,F Class

###

Input power rating and permissible torque
Size 37 47 57 67 77 87 97
Structure S           SA             SF             SAF             SAT              SAZ
Rated Power 0.12-1.5 0.12-1.5 0.18-3 0.25-5.5 0.55-7.5 0.75-15 1.5-22
Ratio 6.8-157.43 7.28-201 7.28-201 7.65-217.41 8.06-256.47 7.88-288 8.26-286.4
Torque(N.m) 90 170 300 520 1270 2280 4000

###

Gear Unit Weight
Gear Unit Type S37 S47 S57 S67 S77 S87 S97
Weight
 
7 10 14 26 50 100 170
The weight are mean values, only for reference

Helical Gearbox

Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.helical gearbox

Right angle helical gearboxes

Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.

Crossed-axis helical gears

Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.helical gearbox

Inline helical gears

Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.helical gearbox

Helix angle

Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
China S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox     helical bevel gearbox vs worm gearChina S Series Helical Worm Gearmotor Geared Motor Industrial Gearbox     helical bevel gearbox vs worm gear
editor by CX 2023-03-27